1. How To Activate The Missing dll Files
DLL's (dynamic link library), basically a combination of executables files that can be used by Windows programs to run properly. Some time you received a sudden pop-up message "System could not fine this DLL file" for example binkw32, maxkernl. Normally you received these types of messages when you installed any new application, computer driver program and some time due to computer mishandling. Actually some DLL files are deactivated due to new software's installation but don't worry you can reactivate these file with the help of a simple command called Regsvr32.
To activate the missing dll file go the Start then Run and type here "regsrv32 with missing dll file name" for example you missed "urlmon.dll" file then you will type in Run "regsvr32 urlmon.dll" and press Ok button. Your system will activate this missing file and hopefully you will not get this missing message again.
2. How to check if you are infected with the Conficker, aka Downup, Downadup & kido
Hey
This is a very big and not known if its bad(steal banking info) or half bad (spam)
But its spread itself everywhere
and is yet to activate
A lot of hard working researchers have made this simple webpage to test if you are infected
If the AntiVirus Badges down't display you are infected
easy as that
Check now before the bot activates and takes your machine with it.
3. How To Install Windows7 From USB Stick
Installing Windows 7 with a USB flash drive - What you need:
The Windows 7 ISO weighs a hefty 2.5GB of disk space, so a flash drive with at least 4GB of space is required. Also, you need the following programs: BootSect, USB_prep8, and PeToUSB. All of which can be downloaded in a handy package that I’ve uploaded here:
When you have everything ready, insert your flash drive, plug in your notebook/laptop/netbook or whatever you call it to AC power and get ready to create a Windows 7 bootable USB flash drive.
Installing Windows 7 with a USB flash drive - Preparation
1. Download the packed RAR file which I gave you the link to earlier and extract its contents to your computer’s Desktop (this makes things easier). This contains the three programs you will need to make a bootable USB flash drive, which are BootSect, USB_prep8, and PeToUSB.
Now that the bootsect and USB_prep8 folders are on your Desktop, do the following.
2. Open the USB_prep8 folder, find USB_prep8.cmd and run it, pressing any key to continue when prompted. This will initiate PeToUSB. PeToUSB will be used to format your flash drive, so it is suggested that you back up any valuable data that you might have on your flash drive before proceeding. Once the backup’s done or you are sure it’s OK for you to format your flash drive, see the PeToUSB options and make sure that “Enable Disk Format”, “Quick Format” and “Enable LBA (FAT16X)” are checked. See photo below.
After you click start and agree to what comes next, your USB flash drive will be formatted, and the next step would be to configure it so that it becomes bootable. Close PeToUSB and the small command prompt window that you opened earlier.
3. Make your USB flash drive bootable using bootsect. Here’s how.
Assuming that the bootsect folder you extracted earlier is already on your desktop, simply do the following. Open a command prompt window by pressing the Windows key + R (or going to Start > Run > typing “cmd” without the quotation marks and hitting Enter).
At the command prompt, type the following word for word:
Here’s a photo of what it should look like:Code:1. “cd Desktop” 2. “cd bootsect” 3. “BootSect.exe” 4. “BootSect.exe /nt60 d:” (wherein “d” stands for the designated letter of my USB flash drive; exchange it with yours if it’s different, since it could be e, f, g, etc.)
And if all goes well, you should be able to read the following message: “Bootcode was successfully updated on all volumes”. This means you now have a bootable USB flash drive. Congratulations!
5. Copy the Windows 7 install files to your bootable USB flash drive. Perhaps the easiest step in all of this minor hackery, is this. Find your Windows 7 beta ISO file, extract its contents using WinRAR, and copy the resulting files (all of them) into your empty and newly configured to boot USB flash drive. Once that’s done, safely remove it, and use it to boot any computer to install Windows 7 on it. It’s that simple.
Installing Windows 7 with a USB flash drive - What now?
Now that you have a bootable USB flash drive with the Windows 7 install files inside it, you’ll be able to install Windows 7 on any machine, provided that the hardware supports it. I may have been unsuccessful in installing Windows 7 on my Aspire One, but I did succeed in installing it on my other laptop, which proves that the bootable USB flash drive I made works.
Hopefully, this little thing I’ve done helps someone out there. Maybe someone like me who didn’t have a spare blank DVD on hand when I wanted to install Windows 7 so bad.
Please say thanx if it helped you.
Enjoy...........
4. একটি দামি adobe photoshop plug-in এখন ছবিকে জিবন্ত এবং সুন্দর করুন খুব সহজে …।। না নিলে মিস করবেন ……(Updated download link)
সফটওয়্যারটি ডাউনলোড করার পরে unzip কর নেন ।। এখন c drive থেকে programe files এর ভেতর adobe নামে একটা folder পাবেন । এটার ভেতর plug-in নামে একটা folder থাকবে সেখানে গেলে impot-export নামে folder এর ভেতর unzip করা file গুলু past করেন ।
click here to download(updated link)
5. How To Recover deleted or corrupt photos
